Stir the Pot

It’s a spoon.  I made it from Bolivian Coffee wood.  It took a few hours, and this being the first project I’ve filmed, it took longer than it probably would have otherwise.  But I enjoyed it, it was a fun process (I’ll dive into the process in a bit, you can also hop over to YouTube and watch it there), and I hope the recipient enjoys it (I’ll talk more about this now).

The team I work with does a lot to impact how our business operates.  We do good work, and it’s reflected on our reputation.  We aren’t ones to just let things be the way they are, simply because that’s the way they’ve been.  We’re happy to be the ones to stir the pot.

Recently, the manager of our team suggested in an email chain that we should have something at our desks to remind us, or ask us, “Did you stir the pot today?”.  I thought it would be a neat project to whip something up and get it on her desk before she got back in the office.  My mind jumped right to a wooden spoon.  Maybe with the phrase “Stir the pot” engraved onto it somehow.  But then you just have a spoon lying there, and I don’t really have an easy way to engrave right now.  “Why not make a stand for it?”  I asked myself.  “Duh, I can 3D print such a thing,” I responded.  So after work, I stopped to get a chunk of wood, and got to work.

I used one of our wooden spoons as a template to get the basic shape I was going for.

Tracing Spoon

After having it traced out, it was just a matter of getting the basic shape roughed out.  That started at the bandsaw to remove the excess by the handle, then used the lathe to turn the handle down to a cylinder shape with a couple little details for some flair.

With the handle done, it was time to hollow out the spoon part.  Had I picked up some carving tools, this would have gone much quicker.  Alas, I used what I had available.  The drill press with a forstner bit made short work of getting the bulk of the wood out of the way.  Then it was on to some carving with a rotary tool.  This left behind a really uneven surface, and while trying to even it out, I thought I’d end up carving right through the entire thing.  Eventually I remembered that I had a curved scraper (which I hadn’t used before this project).  Once I started using this, I was able to smooth out the roughness left behind by the rotary tool, and get a (mostly) consistent spoon shape.

Then it was just a matter of getting the outside of the spoon to look more like a spoon.  This is where a belt sander really comes in handy.


With the shape of the spoon done, I put on a thick coat of mineral oil (so it can be food safe should it ever be used as an actual spoon), and got to work on crafting a stand for it.

This was the hardest part of this project.  I’m very much still a noob when it comes to 3D modeling.  But I opened up Fusion 360 and got to work.  A few hours later, and voila!


It was late, so I set it to print, and went to bed just hoping that it would print successfully over night.  Spoiler Alert!  It did.  And with that, and just a touch of paint to highlight the phrase, we had a completed project.

This slideshow requires JavaScript.

It’s a pretty neat spoon, in my biased opinion.  It’s also a good reminder, not just at work, but in general, don’t be content with things as they are simply because you’ve grown accustomed to them being that way.  If there’s an opportunity for change, and that change is for the better, then dive into it.   Change can be terrifying and difficult, but if were easy, it’d probably be done already.   This attitude being an integral component of our department’s culture is a critical piece of me enjoying my job.  If you want new ideas to bubble up to the surface, you have to stir the pot.

Published by Justin

I'm a Woodworker and Maker, the guy behind the Bear Maked brand.

Leave a Reply

%d bloggers like this: